 | | Light Speed Air Tract System
Code: light-speed-air-tract-system
Price: $101.95
Description: ... (Detail) |
 | | Light Speed Fuel Tank Top
Code: light-speed-fuel-tank-top
Price: $34.95
Description: ... (Detail) |
 | | Light Speed Case Guards
Code: light-speed-case-guards
Price: $73.95
Description: Picture shown for Honda CR 250.... (Detail) |
 | | Light Speed Glide Plate
Code: light-speed-glide-plate
Price: $96.95
Description: ... (Detail) |
 | | Light Speed Clutch Covers
Code: light-speed-clutch-covers
Price: $186.95
Description: ... (Detail) |
 | | Light Speed Front Sprocket Cover
Code: light-speed-front-sprocket-cover
Price: $51.95
Description: ... (Detail) |
 | | Light Speed Frame Guards
Code: light-speed-frame-guards
Price: $96.95
Description: ... (Detail) |
 | | Light Speed Titanium Foot Pegs - 57mm wide
Code: light-speed-titanium-foot-pegs
Price: $179.95
Description: ... (Detail) |
 | | Light Speed Stainless Steel Foot Pegs - 57mm wide
Code: light-speed-stainless-steel-foot-pegs
Price: $96.95
Description: ... (Detail) |
 | | Light Speed Chain Guide
Code: light-speed-chain-guide
Price: $62.95
Description: ... (Detail) |
 | | Light Speed Black Fork Wraps Upper
Code: light-speed-black-fork-wraps-upper
Price: $51.95
Description: ... (Detail) |
 | | Light Speed Front Disk Guard - 295mm Disc
Code: light-speed-front-disk-guard
Price: $89.95
Description: ... (Detail) |
 | | Light Speed Lower Fork Guards
Code: light-speed-lower-fork-guards
Price: $96.95
Description: ... (Detail) |
 | | Light Speed Rear Caliper Guards
Code: light-speed-rear-caliper-guards
Price: $44.95
Description: ... (Detail) |
 | | Light Speed Rear Caliper/Disc Guard Set
Code: light-speed-rear-caliper-disc-guard-set
Price: $101.95
Description: ... (Detail) |
 | | Light Speed Glide Plate/Case Guards Assembly
Code: light-speed-glide-plate-case-guards-assembly
Price: $197.95
Description: ... (Detail) |
 | | Light Speed Black Fork Wraps Lower
Code: light-speed-black-fork-wraps-lower
Price: $51.95
Description: ... (Detail) |
 | | Light Speed Ignition Cover
Code: light-speed-ignition-cover
Price: $186.95
Description: ... (Detail) |
 | | Light Speed Front Brake Hose Guard
Code: light-speed-front-brake-hose-guard
Price: $56.95
Description: ... (Detail) |
 | | Light Speed Brake Line Mount
Code: light-speed-brake-line-mount
Price: $22.95
Description: ... (Detail) |
 | | Light Speed Brake Line Pinch Clamp Set
Code: light-speed-brake-line-pinch-clamp-set
Price: $34.95
Description: ... (Detail) |
 | | Ride Engineering Honda CR Offset Triple Clamp Kit
Code: ride-engineering-honda-cr-offset-triple-clamp-kit
Price: $394.95
Description: "Included in kit: Top & Bottom clamp, pressed in stem and lower bearing.(Bar Mounts & Ti bolts sold separately)
Description:
Our rubber-mounted 22mm offset design creates better handling and more weight placement on the front wheel. This precision machined billet Triple Clamp Set is anodized red and provides two bar positions - 3mm forward and 3mm back of stock. Designed for minimum weight, maximum strength and torsional rigidity. Can be used with stock 7/8"" bar mounts. Weighs 5 oz. less than stock CR clamps. Will fit both 2004 front no. plate and '00-'03 design.
"... (Detail) |
 | | Ride Engineering Honda CR Top Triple Clamp
Code: ride-engineering-honda-cr-top-triple-clamp
Price: $146.95
Description: "Bar Mounts and Ti bolts sold separately
Description:
Now our rubber mounted CR Top Triple Clamp is available in standard offset and installs in minutes on the stock steering stem. This precision machined billet Upper Triple Clamp is anodized red and provides two bar positions - 7mm forward or 1mm forward of stock when using Ride Eng.'s eccentric bar mounts. Designed for minimum weight, maximum strength and torsional rigidity. Can be used with stock 7/8"" bar mounts. Weighs 1/8 lb. Less than stock CR top clamp. Will fit both 2004 front no. plate and '00-'03 design.
"... (Detail) |
 | | Ride Enginerring Honda CR Lower Triple Clamp
Code: ride-engineering-honda-cr-lower-triple-clamp
Price: $253.95
Description: "Included in kit:
Bottom clamp, pressed in stem and lower bearing. (Top clamp, Bar mounts and Ti bolt kit shown not included)
Description:
This precision-machined billet Lower Clamp is anodized red to match our upper clamp. Much stronger than stock, it weighs 1/4 lb. less than stock (2 lbs 11 oz.) Will fit both 2004 front no. plate and '00-'03 design.
"... (Detail) |
 | | Ride Engineering Suzuki RM Lower Triple Clamp
Code: ride-engineering-suzuki-rm-lower-triple-clamp
Price: $233.95
Description: "Included in kit:
Bottom clamp, pressed in stem and lower bearing. (Top clamp shown not included)
Description:
SILVER FINISH. This precision-machined billet Lower Clamp is anodized red to match our upper clamp. Much stronger than stock, it weighs 1/4 lb. less.
"... (Detail) |
 | | Ride Engineering Suzuki RM Top Triple Clamp
Code: ride-engineering-suzuki-rm-top-triple-clamp
Price: $134.95
Description: Description:
SILVER FINISH. This precision machined billet Upper Triple Clamp was designed to retain the stock clamps location on the forks and bar mounts while reducing weight (saves 3 oz) and increasing strength. To be used with the stock Suzuki rubber mounting cones. (RM125 customers must purchase these cones from their Suzuki Dealer).... (Detail) |
 | | Ride Engineering Kawasaki KX Top Triple Clamp
Code: ride-engineering-kawasaki-kx-top-triple-clamp
Price: $146.95
Description: "GREEN or SILVER FINISH(Bar Mounts and Lower Clamp sold separately)
Description:
This precision machined billet Upper Triple Clamp provides two bar positions - 3mm forward and 3mm back of stock. Designed for minimum weight, maximum strength and torsional rigidity. Rubber mounted bar mounts are located 10mm further apart than stock for even better resistance to twisting from a crash. Will accept stock 7/8"" bar mounts.
"... (Detail) |
| | Ride Engineering Suzuki RMZ Top Triple Clamp
Code: ride-engineering-suzuki-rmz-top-triple-clamp
Price: $146.95
Description: "
SILVER FINISH (Lower Clamp, Ti bolts and bar mounts not included)
Description:
This precision machined billet Upper Triple Clamp provides two bar positions - 3mm forward and 3mm back of stock. Designed for minimum weight, maximum strength and torsional rigidity. Rubber mounted bar mounts are located 10mm further apart than stock for even better resistance to twisting from a crash. Will accept stock 7/8"" bar mounts.
"... (Detail) |
 | | Ride Engineering Yamaha YZ Triple Clamp
Code: ride-engineering-yamaha-yz-triple-clamp
Price: Make a selection
Description: YZ TOP TRIPLE CLAMP:
(Bar Mounts sold separately-use P.N: AF-BBM00-CA with this clamp)
Description:
Billet Upper Triple Clamp for YZs
Our precision machined upper triple clamp has been re-designed for 2006 to allow for the increased fork span of the 2006 model. We've revised the underside for more strength and torsional rigidity while keeping the weight down (3 oz. lighter than stock).
Use our over-sized rubber mounted bar mounts or our 7/8" super-light bar mounts with this clamp. Each allow 3mm back or 3mm forward of stock positioning.
YZ LOWER TRIPLE CLAMP KIT:
Included in kit: Bottom clamp, pressed in stem and lower bearing (Bar mounts and upper clamp sold separately).
Description:
This precision machined billet Lower Clamp is anodized blue to match our upper clamp. Its made from the same strong alloys used by the factory teams while saving 4 oz. over stock.
... (Detail) |
 | | Tag T2 Triple Clamp
Code: tag-t2-triple-clamp
Price: Make a selection
Description: CNC machined 7075 cold forged aluminum, 2 bar clamp mounting holes make
positioning of bars unlimited. Full triple clamp set comes complete with pre
pressed stem, bearings and seal.
Features:
High quality pre-pressed seal & bearing
CNC-Machined triple clamp edges allow vibration dissipation
Steering stem pinch for greater rigidity
Full pressure front pinch bar mounts for trouble-free installation & control
Offset and reversible bar mounts allow greater choice of riding position
7075 CNC-Machined Rigid-guided bar-mounts extend a twist-free ride while rubber system dampens vibrations and impacts
CNC Machined pre-pressed stem for greater precision and guidance
... (Detail) |
 | | Tag Metal Trojan Mounts
Code: tag-metal-trojan-mounts
Price: $49.95
Description: Designed to replace OEM CR/KX rubber mounts. Raised 10mm from OEM CR set-up. Mounts are reversible allowing two different forward positions. Must use stock rubber cones... (Detail) |
 | | Tag Metals Universal Mounting Kit
Code: tag-metals-universal-mounting-kit
Price: $49.95
Description: "For 7/8"" to 1 1/8"" bar mounts. Universal mounting kit allows fitment of T2 & other 1.1/8"" diameter handlebars to OEM triple clamps. Should not be used on rubber mounted triple clamps. Use Trojan mount (#4098). - Precision machined from 7075-T6 billet aluminum.
(will raise bars 2/3"" of an inch over stock height)
"... (Detail) |
 | | Tag Metals Optional Mounts
Code: tag-metals-optional-mounts
Price: $49.95
Description: These fit Tag T2 Triple Clamps only.... (Detail) |
 | | Tag Metals T-Bone
Code: tag-metals-t-bone
Price: $49.95
Description: "Rigid one piece bar mount. Helps stabilize rubber mounted bars and improves steering control. Lightweight & strong, precision machined from 7075 T6 billet aluminum.
"... (Detail) |
 | | Ride Engineering Rubber Mounted Bar Mounts for Solid Mounted Triple Clamps
Code: ride-engineering-rubber-mounted-bar-mounts
Price: $84.95
Description: "Bar Mounts for solid mounted triple clamps (including 2006 stock YZ triple clamp)
Description:
Re-designed to reduce weight. Saves 2 oz over GEN I design. Fits 1 1/8 inch oversized handlebars. Made from aircraft quality aluminum, precision machined. 3mm offset. Comes with 8-M8 bolts, 2-M12mm bolts and 2-rubber cushions to insolate the handlebars from vibration. 8 pinch bolt design keeps bars from twisting in a crash. Lots of clamping area to prevent handlebar rotation. (YZ-M1250-KT bolt kit required for 2006 stock YZ top clamp)
"... (Detail) |
 | | Kawasaki/Suzuki/Honda Rubber Mounted Bar Mounts
Code: kawasaki-suzuki-honda-rubber-mounted-bar-mounts
Price: $98.95
Description: "'00-'05 CR125/250/450/500
'90-'06 KX250/KX500 / '02-'05 KX125 / '04-'06 KX250F/RM250z
PN: KX-BBM00-CA
Bar Mounts for rubber mounted triple clamps
Description:
Designed for 1 1/8"" oversized handlebars. Made from aircraft quality aluminum, precision machined. 3mm offset. Comes with 8-M8 bolts and 2-12mm stainless steel posts to fit stock and aftermarket triple clamps (all Pro Circuit Clamps). Super wide grip on bars helps keep them from twisting in a crash. Lots of clamping area to prevent handlebar rotation.
"... (Detail) |
 | | Triple Clamp Titanium Bolt Kit
Code: triple-clamp-titanium-bolt-kit
Price: $79.95
Description: Eight M8x40mm lg. Titanium bolts. Reduced weight with additional strength.
Appl: Most T Clamps... (Detail) |
 | | Pro Circuit Quick Adjust Clutch Perch
Code: pro-circuit-quick-adjust-clutch-perch
Price: $146.95
Description: Quick adjust clutch perch features a threaded on the fly mechanism
for precise one handed clutch cable adjustment. Molded rubber
cover wards of debris. Large ID clamp has a Teflon bushing that
lets the lever twist on the bar instead of breaking off during a fall.
Assembles easily with all stock levers.... (Detail) |
 | | DR.D Hot Start Kit
Code: dr-d-hot-start-kit
Price: $51.95
Description: Dubach Racing's hot start kit allows you to use your right
hand leaving your left hand free to work the decompression lever.
Features automatic shut off system and installs in just a few minutes.
Thumb lever for easy operation.... (Detail) |
 | | Pro Circuit Throttle Tubes
Code: pro-circuit-throttle-tubes
Price: $51.95
Description: CNC-machined aluminum and Teflon coated. Stronger and more durable than the OEM plastic units.... (Detail) |
 | | Ride Engineering Hot Start - Right Side Mount
Code: ride-hot-start-right-side-mount
Price: $64.95
Description: "Ride Engineering Hot Start Right Side Mount:
Mounts in place of the stock master-cylinder bracket,
relocating the hot start to the right side of the
handlebar for easy thumb access. It encourages the rider
to remove his right hand off the throttle, leaving only
the clutch to be operated by the left hand.
Provides plenty of leverage.
Does not interfere with rider's leg.
CNC machined from aircraft quality aluminum. Used by Yamaha
of Troy and Factory Kawasaki.
"... (Detail) |
 | | Pro Circuit Launch Control
Code: pro-circuit-launch-control
Price: $112.95
Description: Extremely technical system designed to enhance traction and lower the front forks during starts to prevent wheelying. The Launch Control machined from 6061-T6 Aluminum features longer detent ears to prevent unexpected releasing and automatic retraction.... (Detail) |
